Van's Air Force

The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!

The VAF News - 3.23.2026. #6515. WDYD, 1stFlt, 3D Rudder Blocks, Hall Trigger, Rattle Can, Firewall Sheet Metal

DeltaRomeo

doug reeves: unfluencer
Staff member
Screenshot 2026-03-22 at 5.32.01 PM.png


Eric Vickery’s RV-10 | Westcliffe, CO. RV-10 #42451
Screenshot 2026-03-22 at 5.41.09 PM.png


Screenshot 2026-03-22 at 5.30.57 PM.png


Update: Working on Hall trigger in the Slick housing. 3D print mockup parts...
Sensor is a 55505 from Littelfuse, which is under $30.
To meet sensor tooth size specs, the wheel is a 24-1
Screenshot 2026-03-22 at 5.33.34 PM.png



Screenshot 2026-03-22 at 5.34.05 PM.png



Adding to an older thread...
I have long suspected the o-ring on the shaft can allow the valve to suck air. A few weeks ago I was speaking with another VAF'er, whose experiments confirmed air leakage and bubble formation via a stem leak. So, I put a fix on my list of things to do at the next condition inspection.
Here it is. Not flown yet, but any future leakage is extremely unlikely.
Screenshot 2026-03-22 at 5.34.34 PM.png



Screenshot 2026-03-22 at 5.35.24 PM.png



I'm actually working with this part now. It goes on the inside of the doubler that goes over the carry thru spar. However, it has to get final drilled later in the process when the landing gear bracket is drilled. In this picture, it's clecoed to the inside.
Screenshot 2026-03-22 at 5.36.16 PM.png


OFF TOPIC:
Screenshot 2026-03-22 at 5.18.48 PM.png


Please consider donating annually to help keep this American 1-person pirate ship afloat:

Get your VansAirForce.net Charity Cap!

Past ‘VAF News’ issues:

THE VAF LIST (a list of RV-related lists)
 
Last edited:
Back
Top