GTN650 and Garmin Pilot Flight Plan Issue

[CodyS]

After the most recent Garmin Pilot update it seems I'm now unable to load flight plans from a GTN650 to Garmin Pilot. Just get prompted to activate an empty flight plan regardless of what's loaded/active on the GTN.

Anyone else with the same setup with the same experience? Didn't have any problems prior to the update.

 

[GSITFlyer]

I'm having the exact same problem. It's extremely annoying. It WILL transfer if you activate a "direct to" on the GTN - that gets to the GTN 650. But if you set up a flight plan in the GTN 650, it does not transfer back to Garmin Pilot, automatically or manually. I'm about to open a ticket with Garmin about it.

 

[wnplt]

Its fixed now update app

 

[CodyS]

Can confirm. Now resolved with today's app update.

 

[CodyS]

I'm having the exact same problem. It's extremely annoying. It WILL transfer if you activate a "direct to" on the GTN - that gets to the GTN 650. But if you set up a flight plan in the GTN 650, it does not transfer back to Garmin Pilot, automatically or manually. I'm about to open a ticket with Garmin about it.

I emailed their support prior to this thread creation. Was told that I was utilizing flight planning all wrong.... then later informed that there was in fact an issue.
Now resolved with 26.5.1