Fenderbean
Well Known Member
Does someone make one like a calk gun? I have the two parts in a can version vs the tube version.
Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Tank sealant applicator
- Thread starter Fenderbean
- Start date
These work pretty good
BH Supplies 60mL Syringe Catheter Tip Sterile with Caps - (No Needle) - Sterile, Individually Wrapped - 50 Syringes: Amazon.com: Industrial & Scientific
BH Supplies 60mL Syringe Catheter Tip Sterile with Caps - (No Needle) - Sterile, Individually Wrapped - 50 Syringes: Amazon.com: Industrial & Scientific
www.amazon.com
For small amounts, a ziploc bag works well. Load the sealant into a corner, twist up like a cake decorating bag and nip the corner off. Squeeze and twist as needed to feed the sealant out.
I used West System syringes. They’re good if you’re not doing a real big area.
You can cut the discharge nozzle to the size you like.
West System
You can cut the discharge nozzle to the size you like.
West System
Brown tool has a good selection of sealant tools if you are looking to make a luxury tool investment.
I like icing/piping bags better than zip-locks.
I like icing/piping bags better than zip-locks.
Fenderbean
Well Known Member
I thought about syringes but thought it maybe too thick, that would be perfect since. Its not a lot just for the elevator SB, the show using a tube of some sort.
The Semco style sealant guns are worth every penny !
Yep. Slip the syringe into a caulk gun for extra leverage. Works great.
Also good for drawing primer from a can. Zero mess and waste
Another vote for the SEMCO sealant gun. It just works so well, keeps mess to a minimum, easy to clean up after, puts out a nice consistent bead ... I don't recall how much they are, but I don't think they are that expensive.
Semco (or knock-off). More than worth the money. Buy a used one and resell afterwards; probably recoup 90% of your money. That said, never getting rid of mine.
Fenderbean
Well Known Member
Very nice, thats perfect thanks
I used horse syringes from Tractor Supply. Get the big ones if you go this route. They worked fine for me.
I'm not sure if this answers your question, but it's very easy to "modify" standard painters caulking guns to match the ones made by Semco ...
The blue handled one I made for 60ml syringes - much easier to use via pistol grip than with the "ears" on the syringe.
HFS
YMMV - But this is a cheap solution.
Attachments
Utah-Jay
Well Known Member
Is this the Pro Seal I need for the tanks? And if so is a pint enough?
www.aircraftspruce.com
PPG Proseal PS-890 B-2 Fuel Tank Sealant - Pint Kit | Aircraft Spruce ®
PPG Proseal PS-890 B-2 Fuel Tank Sealant - Pint Kit This material is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after prolonged ex
