Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Latest activity
-
- Poindexter - reacted to Nihon_Ni's post in the thread To Polish or Paint - Reality Check with
Like.
Some really good info in this thread! I have a polished airplane for one reason -- it's what I always dreamed about. I took care... -
Here is a video of the first flight: Here is a post describing the event... -
petehowell replied to the thread DIY dynamic prop balancer?.Hi Finn, I do have wires shielded wires running into the cockpit - they are about 6 ft long. I’m running at 1Mhz . It does seem speed... -
Richard Connell replied to the thread RV10: N997CZ Takes To The Skies.I also did the same thing. Swapping the GSUs proved to it was the placement on the sub panel. (I can’t remember whether it was the one... -
TWing Kit 82 is finally going to be delivered tomorrow. I was thinking about firing myself (I own my own business) and burying myself in...
-
Wing Kit 82 is finally going to be delivered tomorrow. I was thinking about firing myself (I own my own business) and burying myself in... -
RV-9erA replied to the thread Rotax Myths.So, are you saying that these AvWeb refenced AI points are untrue or just being disrespectful in your response? :cool: -
Mikeyb replied to the thread Red Cube Wiring.There might be a 5.6K resistor under the shrink tubing but something doesn’t look right. It looks like the wire may have come loose and... -
BBavafa replied to the thread PMag update from Hartzell.It is good to see that the debate about SDS vs PMAG is anything but FINISHED. And each side of the debate go to the moon to convivence...
-
FFinnFlyer replied to the thread DIY dynamic prop balancer?.Pete, from an earlier picture it appears you have wires running from the ADXL355 to the cockpit? How long are your wires from the...
-
Biggiesauls replied to the thread RV 916 conversion, worth it?.I got to take a flight in the “prototype “ Lockwood conversion at the Petit Jean RV fly-in back in 2024. One thing that quickly brought... -
-
RV-9erA replied to the thread Rotax Myths.Just out of curiosity, are you actually currently flying and maintaining a Rotax powered aircraft yourself? Dispelling aircraft engine...
-
N8DAV8R replied to the thread Rotax Myths.It's not really even AvWeb content. It's an AI generated summary drawing from various sources. And as you pointed out, a little bit... -
Chachi7565 replied to the thread Alternator Belt - Top Cog vs Bottom Cog.Thanks all! I think I will go with the top cog belt, if that's what actually arrives. I'm pretty impressed with the one I pulled off... -
JJamesClarkIV replied to the thread RV10: N997CZ Takes To The Skies.As an additional data point, I added a 0.125" aluminum 1-piece doubler behind the two GSU25C ADAHRS mounted on the sub panel...I haven't...
