Here is the interior. It is a very basic, day-only VFR flying machine. When I made the wings I did build in a conduit for pulling wires for wingtip lights both sides, so that task will be relatively easy if you want to install lights. The seats were made by Becki Ordorff, who was active in the RV world back in the late 1990's. The non-round price tag is based on the current cost of my engine if you went over to BC to buy one from Aero Sport and the nice, light Sensenich prop. I have a NOS Van's pre-cut instrument panel (steam gauge version) that I never installed, which goes with the plane. Also have the stick for the right seat. I don't usually fly with it in place. (It is easily removable.) Steve