After going through the primer selection process (which took me way too long) I decided on P60G2. Since its now getting too cold to prime outside in New England, I have an inflatable Vevor booth I can use in my detached garage workshop. The booth has two large panels which contain filters on the sides and has a blower motor for providing positive air flow. I figure the filters will take care of any overspray from exiting the booth and contaminating the shop, but not sure about the fumes. Don't want the shop filled with fumes when I'm done. Ive read about various blower set ups for home made booths, but was wondering if anyone has dealt with this with one of the inflatables. Current thinking is to partially open the door and use a fan for negative pressure out the partially opened garage door. Much thanks!