wirejock
Well Known Member
I haven't touched the reservoir except to install it. A few days ago I wanted to remove that little vent fitting. I had to use a wrench to back it out. Threads are really messed up. It galled up the threads on the reservoir. I ran a 1/8" NPT tap in the reservoir to clean up the threads but no way I'm putting that little vent back in. The threads are a mess. I tried a 1/8" NPT die but it's so small, the die bottoms out on the hex head. I tried other 1/8" NPT fittings and they fit just fine in the reservoir. The little Vans vent is messed up.
Is there some other 1/8" NPT vent or something I can fabricate?
Is there some other 1/8" NPT vent or something I can fabricate?