I am using the 2 buttons on my Tosten stick for flap up and down. I am mostly positive(99%...always leave room for doubt) I have it wired correctly. I planned on the left button for down and right button for up. Somehow they are reversed. For those of you using those buttons for flaps which way are yours? It is wired up to the advanced control module. I just confirmed I have the correct color wire going to the flap up/down inputs in the dsub. I am perplexed why they are reversed. Maybe I'm just being an idiot and someone can give me a quick remedy. I believe I could swap the wires in the dsub and that should change the operation of the buttons but doesn't explain why it happened. I also could leave it and just learn the left button is flaps up and right button is down. It is the Pat Hatch flap motor.