Wishing you and yours a happy, safe and RV-filled weekend. v/r,dr
RV News That Caught My Eye Over The Last Few Hours ….dr
__________________________
Reminder, Brad from Garmin will have a kiosk of toys at 52F Fri from 9-11. (N.TX)
SB-00103 posted for all aircraft with Skyview software and canopy-latch warning systems
Thunder over East Texas …pics
GMU-11 Installation Location ….Tony Kirk reply
Have a look at the F-00149 ADAHRS Tray I designed for the RV-7 & RV-9. It already has mounting holes for the GMU 11 and the Dynon ADAHRS.
Match drill the 10 mounting holes and pop-rivet it in place. It works great for the GMU 11 in my RV-7.
The details are in the OP-60 document and it's available here.
The Quadrant Cable Boots (e.g. Q-43)
vansairforce.net
OSH RV Events Info:
OFF TOPIC:
PS: Older issues of the ‘VAF News’ can be found at:
RV News That Caught My Eye Over The Last Few Hours ….dr
__________________________
Reminder, Brad from Garmin will have a kiosk of toys at 52F Fri from 9-11. (N.TX)
Come play w/Garmin avionics kiosk at my home field this Friday! (52F)
If you would like to play around with Garmin avionics in a kiosk similar to what will it be at Oshkosh, with no crowds around and with a factory rep there to answer your questions one on one, stop by the location listed below between the hours of 9 AM and 11 AM this coming Friday, July 12. From...
www.vansairforce.net
SB-00103 posted for all aircraft with Skyview software and canopy-latch warning systems
SB-00103 posted for all aircraft with Skyview software and canopy-latch warning systems
Van's Aircraft has published SB-00103, which directs owners/operators of Dynon Skyview-equipped aircraft with canopy-open warning features installed to update the Skyview settings files, which are available on the Van’s Aircraft website downloads page. On aircraft with EFIS systems that are...
vansairforce.net
Thunder over East Texas …pics
GMU-11 Installation Location ….Tony Kirk reply
Have a look at the F-00149 ADAHRS Tray I designed for the RV-7 & RV-9. It already has mounting holes for the GMU 11 and the Dynon ADAHRS.
Match drill the 10 mounting holes and pop-rivet it in place. It works great for the GMU 11 in my RV-7.
The details are in the OP-60 document and it's available here.
GMU-11 Installation Location?
Hi, After lurking here for at least a decade, I recently purchased a flying RV-7A with a steam-gauge "4-pack" (no AI or DG) & TruTrak Vision AP. I'm planning to install a pair of G5s & a GMU-11 for now, with plans to move to a G3X panel later. I've searched the forums, but haven't located...
vansairforce.net
The Quadrant Cable Boots (e.g. Q-43)
The Quadrant Cable Boots (e.g. Q-43)
After wrangling the cables for my elevator trim on and off, I realized that my quadrant cable boots that were repeatedly removed and reattached became partly damaged, and partly missing. What a pain it is to get these off without damaging them. These Q cables are used for quadrants, electric...
vansairforce.net
OSH RV Events Info:
The OSH’24 RV Events ….summarized in one spot.
Added here up top as I get them - a thread where OSH’24 RV activities can be summarized in one spot. If your RV group has an event you would like me to add to this list, just add a reply to this thread and I'll add a bullet point here in the first post. If you have an event that is going to...
www.vansairforce.net
OFF TOPIC:
PS: Older issues of the ‘VAF News’ can be found at:
Doug's Area ...The VAF News, About VAF, My Resume
Pushed out every now and then.
www.vansairforce.net
