Here’s to an RV-filled 2025 for everyone in the community!
v/r,dr
dr
hobofish
TS Flightlines
…update on hoses for flow dividers
We've done some, mostly for primer lines, but the same idea. We make 2 versions, the short straight stems, prototype pictured, and the longer body versions to custom bend them up to 180*. We use a -3 teflon hose, (.125 ID) and the stem ID is .079 after crimping (standard -3 to fit the hose.) We cusome machine the body to accept the primer nut, or a -2 AN818 nut. All of this is similar to the SDS injector hoses Ross supplies with -3 hose ends. We made these in Red to match the integral firesleeved FWF hoses, and red just looked cool.
Since most stainless injector lines are custom bent from a straight length, we have an 'average; of their lengths, but usualy make these custom to fit the clients engine.
Tom
Dr.Looping
rockwoodrv9’s Video Mount Reply (w/video link)
Here is what I did. It would work for gopro or insta360. I get minimal shake but I am looking for one that is more rigid. I used a shower curtain rod, the end of an old broom, and some epoxy to glue it into the end. I think the space between the two mounts helps with the shake. The aluminum angle is much thicker than needed but I had it and it works. I also put a piece of foam insulation tape on the underside of the mounts so it doesnt scratch the wings.
Im still working on how to add sound tracks but I do record through an adapter on a second camera inside connected to the headsets. It gives good sound - I am just a crappy editor. Here are a few shots and a link to a video you can see the mount in a shadow as I take off.
Two more panel pics added.
….dr
dougreeves.smugmug.com
OFF TOPIC:
Get your VansAirForce.net Charity Cap!
Please consider donating yearly to help keep this American 1-person pirate ship afloat:
Older issues of the ‘VAF News’ can be found at:
THE VAF LIST (a list of RV-related lists)
v/r,dr
dr
WDYDWYRTW? (12 / 28-29 / 2024)
....getting this weekend's started. Raining here Saturday in N.TX. Ugh. v/r,dr
vansairforce.net
hobofish
how to make skis fit?
GM! low time pilot here just got this RV7a and i am having a blast! wanted to know if anyone had any ideas on how to fit their skis inside? as seen below they do fit and don't interfere with the pedals nor the stick. for this to work i would need to bungie the hell out of them so they dont move...
www.vansairforce.net
TS Flightlines
…update on hoses for flow dividers
We've done some, mostly for primer lines, but the same idea. We make 2 versions, the short straight stems, prototype pictured, and the longer body versions to custom bend them up to 180*. We use a -3 teflon hose, (.125 ID) and the stem ID is .079 after crimping (standard -3 to fit the hose.) We cusome machine the body to accept the primer nut, or a -2 AN818 nut. All of this is similar to the SDS injector hoses Ross supplies with -3 hose ends. We made these in Red to match the integral firesleeved FWF hoses, and red just looked cool.
Since most stainless injector lines are custom bent from a straight length, we have an 'average; of their lengths, but usualy make these custom to fit the clients engine.
Tom
Hoses for flow dividers
Would you be interested in flow divider to injector hoses instead of rigid tubing? Tom
vansairforce.net
Dr.Looping
„Optimizing Induction Air“ - I‘ve questions
Hi Guys, I have read the article by Dave Anders “optimizing induction air”. However, I have a question of understanding regarding my application (RV-4, O-320, Marvel Schebler UPDRFAFT Carb). It is clear that a conical airbox can increase the pressure by using the Venturi-/Bernoulli-effect. But...
www.vansairforce.net
rockwoodrv9’s Video Mount Reply (w/video link)
Here is what I did. It would work for gopro or insta360. I get minimal shake but I am looking for one that is more rigid. I used a shower curtain rod, the end of an old broom, and some epoxy to glue it into the end. I think the space between the two mounts helps with the shake. The aluminum angle is much thicker than needed but I had it and it works. I also put a piece of foam insulation tape on the underside of the mounts so it doesnt scratch the wings.
Im still working on how to add sound tracks but I do record through an adapter on a second camera inside connected to the headsets. It gives good sound - I am just a crappy editor. Here are a few shots and a link to a video you can see the mount in a shadow as I take off.
Video Cameras & Mounts
Good morning fellow RVers, I am looking for ideas and recommendations on acquiring, installing and operating video cameras. In particular, what camera brand/models to buy, mounting brackets, controlling apps to turn on/off video recording and lastly video editing apps you use. Adding voice to...
vansairforce.net
Two more panel pics added.
….dr
RV Panels (in High Res) - Doug Reeves
This SmugMug album, created 3/17/17, is used to store LARGE images of RV panels. After clicking on an image, look for the 'Sizes' icon in the lower right corner to select 'Original'. Most images will be over 3,000 pixels wide - almost actual size. If you would like your RV panel spotlighted...
dougreeves.smugmug.com
OFF TOPIC:
Get your VansAirForce.net Charity Cap!
VAF Charity Cap: Help your charity and promote this site.
Get the cap all the cool kids are wearing! I don’t get a penny. It’s around $15. $5 more if you want your N-number on the back (I put 'STAFF' on the back of mine because it makes me laugh. Put STAFF on yours too if it makes you smile). And down the road $10 to the charity of your choice...
vansairforce.net
Please consider donating yearly to help keep this American 1-person pirate ship afloat:
Older issues of the ‘VAF News’ can be found at:
Doug's Area ...The VAF News, About VAF, My Resume
Pushed out every now and then.
www.vansairforce.net
THE VAF LIST (a list of RV-related lists)
THE VAF LIST (a list of RV-related lists)
The VAF List ...a list of RV-related lists. RV-related things you might want to browse over (a closed post that is sticky and maintained by dr). Link to this in 'Links' in the menu. v/r,dr Small businesses that help bring you this list of RV-related lists: 360 Avionics www.360Avionics.com Ace...
vansairforce.net
Last edited:
