At a 100 hrs my Hartzell CS prop had to go into the prop shop to be resealed due to slinging grease. Now the front spinner bulkhead screw holes don't line up.
The prop shop said the front dome gets torqued on and never lands exactly on the same spot as before the disassembly. They say all the new certified prop bulkheads come slotted to compensate for this.
My question for those that have run into this:
What are you doing to make the front bulkhead fit?
The prop shop said the front dome gets torqued on and never lands exactly on the same spot as before the disassembly. They say all the new certified prop bulkheads come slotted to compensate for this.
My question for those that have run into this:
What are you doing to make the front bulkhead fit?