MacCool
Well Known Member
This little ding/hangar rash on the trailing edge of the right wingtip was there when I bought the plane. It's a chunk out of the gel coat about 2cm x 1cm. I finally got to the repair. I sanded it down, filled it with some epoxy and filler, and smoothed it out and then shot it a little with some color-matched rattle can and from TouchUp Direct, then wet sanded it down to 1500 grit. I have the remaining paint and associated rattle can clear coat...
What are my next steps to finish this off?
What are my next steps to finish this off?