SDS - Fuel Flow Verification Procedure

[Dad's RV-10]

A buddy is nearing the AWC inspection of his RV-10 with SDS EM-6 EFI and is not quite sure how to accomplish the testing needed to complete the attached form.

Any feedback from those of you with SDS EM-6 is appreciated.

TIA.

 

[Mike S]

Disconnect the fuel hose from the distribution block, and direct the fuel into a gallon jug.

Turn on the pump, wait til the jug is full, turn off pump. Have someone with a stop watch call the start time, and turn off the stop watch when the gallon jug is full.

Now simple math to divide one hour by the time to flow a gallon or GPH.