BGordon
Well Known Member
Good morning everyone,
working on fitting my cowling halves and have sanded a bit too much off. I wanted a gap of 3/32 and in a few spots it noticeably enlarges to about 1/16. Any suggestions on how to fill the gaps so that I can re-sand. The shim in the picture is .032
thanks
Brandon
working on fitting my cowling halves and have sanded a bit too much off. I wanted a gap of 3/32 and in a few spots it noticeably enlarges to about 1/16. Any suggestions on how to fill the gaps so that I can re-sand. The shim in the picture is .032
thanks
Brandon