Does anyone know if the control stick for an RV-14 can be used in an RV-8? I'd much rather have a nicely pre-bent stick than buying a RV-8 stick and pay someone to have it bent. When I fitted the current stick in my RV-8 I shortened to clear under the panel and now it is probably too short to be bent, so I'll be buying a new one anyway. I've seen that Tosten has a rv-14 stick on their site for $50
https://tostenmanufacturing.com/product/rv-14-control-shaft/
I'm just wondering if anyone has retrofitted the 14 stick into the 8 or if anyone knows IF the RV-14 mounting points match up with the RV-8 mounting points.
My dad isn't as tall as me and would like the stick back further and up higher like the 14.
Thanks!!
https://tostenmanufacturing.com/product/rv-14-control-shaft/
I'm just wondering if anyone has retrofitted the 14 stick into the 8 or if anyone knows IF the RV-14 mounting points match up with the RV-8 mounting points.
My dad isn't as tall as me and would like the stick back further and up higher like the 14.
Thanks!!