Pete, again I caution that these dimensions are approximate, particularly because of the kraft paper and plastic covering most of the engine. But, this is what I've got:
width (B): 34"
length (A): 32-1/4" (front of flange, NOT the ring gear, to rear of oil filter)
between lifting lugs (C): 6-3/4"
I'm somewhat confident of dimension C but I can't be absolutely certain that it was the rear lug that I was feeling through the plastic and paper. I would call the tolerance on all my measurements to be well within +-1/4".
Hope this helps. If anyone sees this that has their EXP119 out of the crate, please confirm.