APRS iGate from a Pi
Glen,
Sent you an email, but thought I would do it this way too.
I have a Pi, 2 SDR dongle's, one with and one without E4000, and a bunch of SD cards, and everything else needed.
I have followed Marco's step by step instructions with both dongles. It will recognize the SDR dongles all the way up to the startup script, where it then says noway hosay after it runs it. Stopping the script and it see the dongle again.
My callsign will show up on APRS.FI from the iGate, but not my tracker, so not receiving anything.
What different thing did you do with the script?
I would like to get a copy of the SD card image. I can send you a card to copy to. What size card do you need and I will send to you with a SASE for return?
If you have your steps written down and can email them to me, I will try that until you can pass the image to me. Email is
[email protected]
Thanks for you time and help. I too have spent hours on this, but not as many as you. I am trying to put an iGate out at Stead for all of us race fans, oh, and so my wife can see me when I am flying my Rocket.
Thanks in advance for your help.
Brian