Van's Air Force

The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!

hangar cleanout

Flyyak

Well Known Member
Friend
I have the following if anyone in the process of building may need any of it. I will be at Oshkosh Monday and Tuesday and if you contact me, I will bring the items that may interest you and you may inspect and purchase them:

Niagra 20002A oil cooler - Perfect condition with fittings for a lycoming 0320/0360 I used about 50 hours and I swapped to a little larger Stewart Warner given to me by a hangar friend.
I mounted on baffling behind cyl #4 and the cut out is for engine mount tube. Van's price $900 and ACS is more - interested in $450

USATCO No.53-RGK Professional Rivet Gun set - Came with my RV7 Kit. Rivet gun never used. I used several of the rivet sets but I already had a gun and several bucking bars. New $383 interested in $150

Avery C rivet and dimpler tool - new $279 interested in $100

44.5" throttle cable - new-never installed- Van's $160 interested in $75

Parker brass fuel valve - Van';s $67 interest in $25

Crotch Strap kit for dual seats for 7/9 both seats - Van's $67 interested in $25

S-605 SEN Front Bulkhead Sensenich propeller 11 3/16" - Van's $112 interested in $40

Tail wheel springs and chains - I have Van's tail wheel fork and it goes with the chains/spring - I used a Bell fork- interested in $20

New Anti Splat Ultimate Gust lock - $298 interested in $150

If interested in any or all, let me know by Sunday and I will bring them with me to the show.
 

Attachments

I have a throttle quadrant in my 7A. Will the cable you have work with that? I am considering switching to Vernier though. Is this a complete cable with the vernier knob on one end, or is it a simple cable? I am considering switching because of the precision possible with turning the knob. My quadrant doesn't have any fine tuning. Mainly for mixture this would be an advantage i think.
 
Back
Top