Has anyone encountered issues with their GTX-45R not being visible to the G3X (at initial set up).
XPDR is showing with Red Cross on the G3X system Information page. I’ve checked power supply as well as all pins to the transponder and GSU 25. RS-232 Port 2 is configured to Connext 57600 baud. Appreciate advice on where to check next.
XPDR is showing with Red Cross on the G3X system Information page. I’ve checked power supply as well as all pins to the transponder and GSU 25. RS-232 Port 2 is configured to Connext 57600 baud. Appreciate advice on where to check next.