HDX in RV-6A tip up
I just finished this job on my 2001 RV-6A.
One 10" HDX for the pilot and dual coms, auto pilot panel, audio panel, SDS panel and all the switches and breakers here and there.
Removed both panel supports. The panel is supported on each end with the normal two screws on each end. Then two 3/4" angle in two place on the bottom of the panel. One 3/4" angle straight in front of the pilot angled down to miss the canopy bow when it closes. and the right side with the glovebox is supported by the top of the glove box angle attachment to the sub panel.
The glovebox required a cutout for the canopy bow closure.
I have another RV-6 that I'm working on and will tell you I was going to put a glovebox in it, But decided I didn't like it enough to take up the panel space for it.
Not at the airport so can't send you pictures at this time.
Art