I am continuing to troubleshoot my new G3X Touch panel. I have almost all the red X's in the configuration mode gone. One that persists does not appear in the documentation or any online search I have tried.
If I boot my PFD in configuration mode and choose System Information, the TRFC item between the transponder and Vertical Power lines has a red X on it. When I select it, the window on the right side is captioned "Traffic Input Info" and has the text "Traffic Input Failed" in it. Nothing else displayed.
My best guess is that this could be because I don't have a GPS position fix on the GTN 650 or the G3X because I am working inside the hangar where it is warm. But I am wondering if anyone else has seen this error and has any information about it, since any cause other than lack of GPS position fix is something I want to take care of before I close up the panel.
If I boot my PFD in configuration mode and choose System Information, the TRFC item between the transponder and Vertical Power lines has a red X on it. When I select it, the window on the right side is captioned "Traffic Input Info" and has the text "Traffic Input Failed" in it. Nothing else displayed.
My best guess is that this could be because I don't have a GPS position fix on the GTN 650 or the G3X because I am working inside the hangar where it is warm. But I am wondering if anyone else has seen this error and has any information about it, since any cause other than lack of GPS position fix is something I want to take care of before I close up the panel.