JoeRuscito
Member
Working on my -14 tail cone bottom skin and noticed that I have some dishing showing up after I rivet. The dimples were super clean as you can see from the not yet riveted holes on the bulkheads and the edges of the sheet. Then after I hammer a rivet it seems to pull the skin in slightly. It may just be the lighting as you can only see it at certain angles. I haven't seen this show up so noticeably on any of the tail feathers. Is this normal? What might I have done wrong here that didn't show up elsewhere?
Ribs and stiffeners were dimpled with squeezer and skin was done with c frame and hammer (as were all other parts I've completed to date).
Ribs and stiffeners were dimpled with squeezer and skin was done with c frame and hammer (as were all other parts I've completed to date).