Canopy alignment blocks

[Wingit]

Does anyone one know the dimension of the canopy alignment blocks 38-19 part 01441 the show length but not thickness and width. Thank you

Dave

 

[azflyer21]

The wood block should have been supplied in the Finish Kit. Sorry I don't know the dimensions.

 

[Wingit]

Thanks mine are MIA

 

[JDA_BTR]

Mine were in one of the bags as small parts

 

[Wingit]

Alignment blocks

No joy still looking

 

[Wingit]

Alignment blocks

Thank you I got the information.

 

[rdt7]

Can't find mine either. Was it wood? I recall seeing a piece of wood in my big Finish Kit box but thought it was part of the packaging. If it's wood, I'll make them but need the dimensions.

 

[bertschb]

Can't find mine either. Was it wood?

Yes, it's just a piece of wood. Mine wasn't labeled. Sorry, I can't get you the dimensions as mine are currently clamped into place and I'm drilling the canopy.

 

[rdt7]

Yes, it's just a piece of wood. Mine wasn't labeled. Sorry, I can't get you the dimensions as mine are currently clamped into place and I'm drilling the canopy.

Thanks Brian. I think we found it. No part number but had "MIL 0468-T" printed on it.

 

[Larry KMYA]

I ended up making my own, then found the block with a part number on it after completing the canopy

 

[RWGatlin83]

Here is the part drawing dimensions: