macrafic
Well Known Member
Hi, I have upgraded my panel to a 3-display G3X Touch (from a non-touch system) and have completed the configuration, with the following remaining questions/issues. Your help would be much appreciated!!!
I can not locate where to input my engine information (type, hp, engine time, total time, etc.). If I go to the "Engine & AIrframe" section from the main config screen, I am taken to the Engine/Airframe Input Configuration Page. I can not find a way to get to the EIS Configuration Page. (Page 34-119 of the latest G3X Touch Install manual).
I also can not find my flight logs. Per the latest G3X Touch pilot guide, page 382, on my MFD with my logging SD card installed, I should be able to hit MENU twice to get to the main menu and see a Flight Log button. I do not see the button. I am using the logging SD card from my previous non-touch system (nothing else on the card), if that makes a difference. What magic must I perform to get to my flight logs?
Thanks in advance!
I can not locate where to input my engine information (type, hp, engine time, total time, etc.). If I go to the "Engine & AIrframe" section from the main config screen, I am taken to the Engine/Airframe Input Configuration Page. I can not find a way to get to the EIS Configuration Page. (Page 34-119 of the latest G3X Touch Install manual).
I also can not find my flight logs. Per the latest G3X Touch pilot guide, page 382, on my MFD with my logging SD card installed, I should be able to hit MENU twice to get to the main menu and see a Flight Log button. I do not see the button. I am using the logging SD card from my previous non-touch system (nothing else on the card), if that makes a difference. What magic must I perform to get to my flight logs?
Thanks in advance!