I have a Sensenich ground adjustable pitch prop made for high performance Van's aircraft. My problem is that the Sensenich front spinner bulkhead (for the metal prop) from Van's (S-605 SEN) is too large. The spinner lacks about an inch from bottoming out as it should on the rear spinner bulkhead.
I wonder if the Sensenich Front Bulkhead (C2395) for the RVs with 1/2" bolts would work.
Any advice on how to solve this problem is appreciated.
I wonder if the Sensenich Front Bulkhead (C2395) for the RVs with 1/2" bolts would work.
Any advice on how to solve this problem is appreciated.