I believe I followed the instructions correctly when trimming the 2 outboard wing ribs, however when I went to attach the aileron hinge brackets and match drilled the #30 holes the edge distance seems quite small. When I used the calipers, it showed about 2.5 mm. To me, this seems quite close and I'm not sure I am happy with that little material. I have decided to make a couple of reinforcement type doublers that will be on the inside of the wing rib to provide a bit more strength. Curious in any others have found this while attaching the outboard hinge brakets.
Thanks
![Aileron hinge bracket 2.JPG Aileron hinge bracket 2.JPG](https://vansairforce.net/data/attachments/39/39330-74614a0f79f8bacb642ff1f266621054.jpg)
![Aileron hinge bracket 1.JPG Aileron hinge bracket 1.JPG](https://vansairforce.net/data/attachments/39/39331-1ec12ec9709c09832a1eec6624ed3a80.jpg)
Thanks
![Aileron hinge bracket 2.JPG Aileron hinge bracket 2.JPG](https://vansairforce.net/data/attachments/39/39330-74614a0f79f8bacb642ff1f266621054.jpg)
![Aileron hinge bracket 1.JPG Aileron hinge bracket 1.JPG](https://vansairforce.net/data/attachments/39/39331-1ec12ec9709c09832a1eec6624ed3a80.jpg)