Hi I am NOT using alodine for most things as I’m wanting to avoid hexavalent chromium during my build however I have a small amount sealed in a 20 litre pail in its gallon container. I would like to protect my non alclad doublers, horns, brackets etc.
Is it easiest to brush it on or dip it….after doing these parts you have to wash off with water and how do people catch the rinse water to dispose of it properly. Obviously not wanting to really have it anywhere near me and certainly not all over my property. I have rubber gloves, a hazmat suit, respirator etc….want to get all these tail parts done in one go.
I am NOT using akzo zinc chromate. Same deal as above.
I am using wattyl super etch using my own gun with rattle cans for small touch Ups.
I started with Stewart systems ekopoxy but really did not get on well with it. I do have their eko clean which does a great job of de greasing and cleaning the Ali.
Any reason the water based eko clean would be no good for a single pack epoxy primer like super etch? I am not etching with the eko etch I have as the super etch does that itself…..after scotchbrite and cleaning.
Not looking for a primer war here….just choosing not to go near the really poisonous stuff for personal reasons any more than I have to….just asking the basic questions above.cheers.
Is it easiest to brush it on or dip it….after doing these parts you have to wash off with water and how do people catch the rinse water to dispose of it properly. Obviously not wanting to really have it anywhere near me and certainly not all over my property. I have rubber gloves, a hazmat suit, respirator etc….want to get all these tail parts done in one go.
I am NOT using akzo zinc chromate. Same deal as above.
I am using wattyl super etch using my own gun with rattle cans for small touch Ups.
I started with Stewart systems ekopoxy but really did not get on well with it. I do have their eko clean which does a great job of de greasing and cleaning the Ali.
Any reason the water based eko clean would be no good for a single pack epoxy primer like super etch? I am not etching with the eko etch I have as the super etch does that itself…..after scotchbrite and cleaning.
Not looking for a primer war here….just choosing not to go near the really poisonous stuff for personal reasons any more than I have to….just asking the basic questions above.cheers.