Freemasm
Well Known Member
Trying to maintain fidelity with the G3X manual.
Wiring for the oil temp probe. G3 manual calls for a shielded, twisted pair.
OK. The contradictions are:
- Other TCs (EGTs, CHTs) utilize relatively expensive, unshielded, non-twisted TC leads.
- Flying leads from the Oil Temp probe are simple 22gage wires (no shielding).
Follow-up question. Shield would obviously have to float on the device end. What size unshielded window would be acceptable?
Anybody here get me smarter on this? Thx.
Wiring for the oil temp probe. G3 manual calls for a shielded, twisted pair.
OK. The contradictions are:
- Other TCs (EGTs, CHTs) utilize relatively expensive, unshielded, non-twisted TC leads.
- Flying leads from the Oil Temp probe are simple 22gage wires (no shielding).
Follow-up question. Shield would obviously have to float on the device end. What size unshielded window would be acceptable?
Anybody here get me smarter on this? Thx.
Last edited: