Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Latest activity
-
Brantel replied to the thread MicroEFIS 2.0.That would be a very easy implementation. I built something similar to what you want over 12 years ago before Garmin came out with the... -
Taltruda replied to the thread Ground Adjustable Rudder Pedals.Idk.. I think the in flight adjustable ones are janky.. there’s a wiggle rocking to them, and the lock also can wear out, causing them... -
TThomas Lukasczyk replied to the thread Ellison Throttle Body.Hello, I have been flying my Ellison TBI on myO-320 RV-4 for over 20 years now. The actual flying time of 320 hours is rather low. The...
-
-
Jjabarr replied to the thread Oil pressure engine off ?.It’s the VDO oil pressure sending unit. Common failure mode.
-
SkyboundResolve replied to the thread Another Pmag question for the day.I built my own using a custom MSD 8.5mm Super Conductor wire kit and it worked out great. You can get the bulk wire, boots, and... -
FORANE replied to the thread Another Pmag question for the day.https://vansairforce.net/threads/how-do-i-make-msd-wires-for-e-mag.238795/ -
AussieRV8 replied to the thread 8 landing gear bolt torque.Thanks, Probable stupid question.. why are the new bolts longer? Is that because of the upgraded nuts? Will have to think of replacing... -
Thanks for the memories, it was a special day to be able to host RV-1 and its crew for a fuel break. I forgot to grab a picture of it... -
See John. See John paint. See John paint gold. “John, Those are really wide pin stripes!!” 🤣 -
Well…it’s happening! Long day yesterday ended with the big parts in primer - lots of little stuff needs priming yet (separately). Paint...
-
Rocket: “They tell me that John Stahr is arriving today!!” Tundra: “Don’t get too excited kid - I’ve been flying ten years, and no one...
-
Well, let's say that using one's intellectual capacity for a second will confirm that theory, at least to a certain degree. An engine... -
PHi , I have a standard Vans oil pressure gauge on my O 320 RV 6 it is showing about 10 psi with master on , engine not running ? When...
-
-
petehowell replied to the thread Open Source EI for Lycoming??.Testing has begun! Bryan sent the test mule last week and I made a crude test bench for it. Been spinning it for a few hours. The... -
-
Dan 57 replied to the thread Pre oil system.Well, let's say that using one's intellectual capacity for a second will confirm that theory, at least to a certain degree. An engine...
