Dynon D180 Oil Pressure Sensor Swap Help
I had a VDO oil pressure sensor that occasionally acts up. I tried replacing it with a new Dynon pressure sensor for 150psi. It was hard enough getting one that is part number 105492-002. The problem is I didn’t notice the note on stein air that it is not compatible with legacy D180. I found...
vansairforce.net
First Flight: Richard Raymond | Brisbane, Australia. RV-14A #141047
https://www.vansaircraft.com/first-flights/richard-raymond/
vansairforce.net
Student RV12iS Project Vermont
Bennington STEMworks in collaboration with Southwest Tech, the regional technical center and EAA chapter 1375 at Bennington airport (DDH) is building an RV12iS with a group of teenage students. It is an afterschool program staffed by volunteers and is based in the Engineering Laboratory of...
vansairforce.net
Show us a pic of your FINISHED RV-8/8A!!!
Wow, that’s beautiful Robert, Congratulations!
vansairforce.net
Show us the status of your 7/7A project!
SE2 I remember back when you were building your shop. Great to see the steady progress. A suggestion as I finish my 7, do everything you think you need to do in the tail cone before riveting on the top skin. Static air install and tubing run. Mount possibly for ELT. Wiring to rear light ...
vansairforce.net
What the...???
A few days ago I was heading north from the coast and noticed an ADSB traffic icon on the same track...visibly catching me on the screen. So of course I called up the data. Huh??? A rotorcraft? 85 knots faster? What the....? Thought about it a minute, and made a guess... Yep, I was...
vansairforce.net
RV-4 Status Update …Frank
Making room for wing jig! Going to trim back some leading edge skin for the larger (21 gallon per side) fuel tanks.
Third time is the Charm. My 4 Will get done!
Third time is the charm! I've started this project too many times not to finish, with the first two kits being sold for various reasons, and I keep getting sellers remorse. This one is gonna fly. My mission has been refined to a point that make this 4 very old school with bits of Rocket. Two...
vansairforce.net
Rudder lowest rib pulled rivets
Hi, I'm building the rudder. I'm doing the pulled rivets at the bottom of the rudder that join the 904A-1 and 904B-1. The rudder horn is in the way of the forward-most rivet. No way to get the rivet puller even remotely straight onto it. Not even with a wedge. What to do? Jam it in there...
vansairforce.net
OFF TOPIC:
Please consider donating annually to help keep this American 1-person pirate ship afloat:
Get your VansAirForce.net Charity Cap!
VAF Charity Cap: Help your charity and promote this site.
Get the cap all the cool kids are wearing! I don’t get a penny. It’s around $15. $5 more if you want your N-number on the back (I put 'STAFF' on the back of mine because it makes me laugh. Put STAFF on yours too if it makes you smile). And down the road $10 to the charity of your choice...
vansairforce.net
Past ‘VAF News’ issues:
Doug's Area ...The VAF News, About VAF, My Resume
Pushed out every now and then.
www.vansairforce.net
THE VAF LIST (a list of RV-related lists)
THE VAF LIST (a list of RV-related lists)
The VAF List ...a list of RV-related lists. RV-related things you might want to browse over (a closed post that is sticky and maintained by dr). Link to this in 'Links' in the menu. v/r,dr Small businesses that help bring you this list of RV-related lists: 360 Avionics www.360Avionics.com Ace...
vansairforce.net
