RV-10 Empennage/Wing/Fuselage kits with Finish Kit to come shortly. Unfortunately I no longer have the time to build after taking a full-time flying job in semi-retirement.
Asking $62,000 for everything below.
Buy a kit unaffected by LCPs! The Empennage, Wing and Fuselage kits shipped before the LCP issues. This kit is at, or past, the Quick Build stage. Get years ahead of others who are just getting started with their builds! Buy the kits and get ALL the tools thrown in.
Tools: Complete set including Numatx hydraulic squeezer ($1,150 value), all hand tools, band saw, drill press, Sioux Pneumatic drill ($350 value), Pneumatic Angle drill ($350 value), various riveting tools and bucking bars including several tungsten and specialized bucking bars, and a DRDT-2 dimpler. Over $10,000 in tools alone. Including Four Work Benches, painting supplies including 2 spray guns, miscellaneous tools, and many Clecos, Cleco pliers. Wing and Fuselage Dollies included.
Empennage: Completed with builder assist at Synergy Air South March 2021, all except fiberglass and finish assembly.
Wings: Slow Build and completed through top skin installation.
Fuselage: Slow Build completed up to the mating of Tail cone and the Forward Fuse, including 2 Air Ward Tunnel access panels and 2 Baggage Access panels
Finishing Kit: Ordered June 2022 and delivery expected very soon.. Set up for Lycoming IO-540.
Complete Building documentation and builder’s logs available. All parts prepped with Pre-kote and Scotchbrite and primed with Kirker 2 part Epoxy Enduro Prime with empennage being the exception. It was primed by Synergy Air with Sherwin Williams P60G2 Wash Primer.
Build quality is excellent and all receipts and documents are available for the new owner including all build logs. $5,000 deposit is placed on the Finish kit.
Kit and tools are Located in Charlotte, NC for pick-up. Delivery is at the buyer's expense.
Current pricing would be over $65,600.00 (including Finish kit deposit) without the tools. Skip the line and finish years before a new build.
Email for more details and many more photos!
todd@nodabrewing(dot)com
Asking $62,000 for everything below.
Buy a kit unaffected by LCPs! The Empennage, Wing and Fuselage kits shipped before the LCP issues. This kit is at, or past, the Quick Build stage. Get years ahead of others who are just getting started with their builds! Buy the kits and get ALL the tools thrown in.
Tools: Complete set including Numatx hydraulic squeezer ($1,150 value), all hand tools, band saw, drill press, Sioux Pneumatic drill ($350 value), Pneumatic Angle drill ($350 value), various riveting tools and bucking bars including several tungsten and specialized bucking bars, and a DRDT-2 dimpler. Over $10,000 in tools alone. Including Four Work Benches, painting supplies including 2 spray guns, miscellaneous tools, and many Clecos, Cleco pliers. Wing and Fuselage Dollies included.
Empennage: Completed with builder assist at Synergy Air South March 2021, all except fiberglass and finish assembly.
Wings: Slow Build and completed through top skin installation.
Fuselage: Slow Build completed up to the mating of Tail cone and the Forward Fuse, including 2 Air Ward Tunnel access panels and 2 Baggage Access panels
Finishing Kit: Ordered June 2022 and delivery expected very soon.. Set up for Lycoming IO-540.
Complete Building documentation and builder’s logs available. All parts prepped with Pre-kote and Scotchbrite and primed with Kirker 2 part Epoxy Enduro Prime with empennage being the exception. It was primed by Synergy Air with Sherwin Williams P60G2 Wash Primer.
Build quality is excellent and all receipts and documents are available for the new owner including all build logs. $5,000 deposit is placed on the Finish kit.
Kit and tools are Located in Charlotte, NC for pick-up. Delivery is at the buyer's expense.
Current pricing would be over $65,600.00 (including Finish kit deposit) without the tools. Skip the line and finish years before a new build.
Email for more details and many more photos!
todd@nodabrewing(dot)com
