I had Stein build out my panel- it is truly a work of art and very well done. I had all the boxes fitted to my sub panel and configured the GTX 45 to fit behind the panel. When I got the panel back, I noticed the GTX portion was about 8 inches too short and won’t allow the transponder to fit where I intended.
All of the other space is accounted for on the sub panel.
Any suggestions on how to get the length I need or am I stuck trying to splice into the transponder (I don’t like that thought at all).
The photo shows the wires forward. They should be toward the firewall so the transponder could slide from the front. If I reverse the mount, I have no room to slide the box in considering the firewall and rudder pedals.
All of the other space is accounted for on the sub panel.
Any suggestions on how to get the length I need or am I stuck trying to splice into the transponder (I don’t like that thought at all).
The photo shows the wires forward. They should be toward the firewall so the transponder could slide from the front. If I reverse the mount, I have no room to slide the box in considering the firewall and rudder pedals.