Hello,
Putting -12 rivets in the W-818 aileron to bellcrank pushrods. Used the C-frame on the first 4 rivets, with Ok results. Just curious what others have used, squeezers vs gun and bar (I’m not welding). May try -11 rivets, but same question.
It’s going on a 7, but guessing it’s an issue on other models as well.
Thanks
Putting -12 rivets in the W-818 aileron to bellcrank pushrods. Used the C-frame on the first 4 rivets, with Ok results. Just curious what others have used, squeezers vs gun and bar (I’m not welding). May try -11 rivets, but same question.
It’s going on a 7, but guessing it’s an issue on other models as well.
Thanks