MartinACFactory
Well Known Member
Hello RVers,
I am currently planning the routing of all Electric & Avionic harness routing inside my RV-8 fuselage.
I am mounting my battery in the aft fuselage. I also have a Garmin Autopilot Pitch servo mounted near the battery. I understand that I need to route the battery cable from aft fuselage to firewall along the structure under the fuselage, per Van's drawing. My concern is that I shall also route the pitch servo harness to dash panel along the same path. Could this large power cable and the servo harness be close relative to the other or they require some distance in between them to avoid magnetic disturbance.
Does anyone have pictures to share on how they did this installation on their RV-8 ?
Many thanks !
I am currently planning the routing of all Electric & Avionic harness routing inside my RV-8 fuselage.
I am mounting my battery in the aft fuselage. I also have a Garmin Autopilot Pitch servo mounted near the battery. I understand that I need to route the battery cable from aft fuselage to firewall along the structure under the fuselage, per Van's drawing. My concern is that I shall also route the pitch servo harness to dash panel along the same path. Could this large power cable and the servo harness be close relative to the other or they require some distance in between them to avoid magnetic disturbance.
Does anyone have pictures to share on how they did this installation on their RV-8 ?
Many thanks !