dmattmul
Well Known Member
Most using the EFII System 32 use Fuel Pump 1 as their main pump and 2 is only activated when pump 1 drops below a certain pump pressure. I want to have at least pump 2 wired into the G3X GEA so I can get a visually (and possible an audible) alert on my G3X that pump 2 is now on. Currently I need to visually scan the System 32 panel to see that pump 2 is now on. I'd like to know when pump 2 is on. For those of you who know and understand the GEA which inputs would I use? It appears J244 pin 25 and 28 could be used for pump 1 and 2? Has anyone done this already and what pins did you use? Any issues? I don't want to create a point of failure for these critical components.