I've been scratching my head (and other areas for a while on this one), and looked at some older posts, but am looking for more specific info on static line routing.
I am working on my -9 and using basic VFR steam gauges, so running static (Van's kit) from aft fuse up to the panel. Can anyone lend a good routing for this, especially getting past the spar bulkheads?
Thanks for the help!
Rick Glatthaar
RV-9
Slowbuild since 2002.....
I am working on my -9 and using basic VFR steam gauges, so running static (Van's kit) from aft fuse up to the panel. Can anyone lend a good routing for this, especially getting past the spar bulkheads?
Thanks for the help!
Rick Glatthaar
RV-9
Slowbuild since 2002.....