VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.






VAF on Twitter:
@VansAirForceNet

Prev Previous Post   Next Post Next
  #1  
Old 12-10-2020, 08:15 AM
dwbuckeye dwbuckeye is offline
 
Join Date: Jul 2020
Location: Ft. Wayne
Posts: 11
Default 912 Oil Pressure

We had a sending unit failure on our RV12, replaced it and changed the oil at the same time. Now we are only getting oil pressure into the yellow zone on the Dynon. Our mechanic is confidant everything is set up right, but doesn't have an idea why the pressure is reading low. Any ideas out there? The engine sounds perfectly smooth and we have run it up to proper oil temp to run it at 4000 RPM - but still no readings in the green.
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:17 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.