VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 07-20-2022, 09:35 PM
BruceW BruceW is offline
 
Join Date: Aug 2005
Location: Elk Grove, CA
Posts: 269
Default Keyless chuck for Sioux air drill?

Im trying to source a compact keyless chuck for a Sioux air drill.
3/8" max bit. Most seem chunky for the sleek Sioux drill.
Looking for compact. Suggestions appreciated.
__________________
Bruce W
RV-7 QB (500+ hours)
RV-14 working the tail
Elk Grove, CA
Reply With Quote
  #2  
Old 07-20-2022, 10:32 PM
Larco's Avatar
Larco Larco is offline
 
Join Date: Mar 2005
Location: DVT Phoenix
Posts: 1,298
Default

I have this style on my air drills one being a Sioux and it works fine. It took me a little while to get used to it on the Sioux but wouldn't change it back to a keyed chuck.
https://www.lowes.com/pd/Jacobs-Chuc...B&gclsrc=aw.ds
__________________
Larry
Reply With Quote
  #3  
Old 07-21-2022, 08:33 AM
rapid_ascent rapid_ascent is offline
 
Join Date: Mar 2008
Location: Dublin, CA
Posts: 1,733
Default

I have a setup like you are looking for that I purchased from Cleaveland Tools. I donít think they sell it any longer. If you do a search for Boeing Quick Change Drill you will find several places including ACS that sell the chuck. Cleaveland sold adapters for the common aircraft drill bits. They also sold an adapter which you could install a standard chuck that I use for other drill sizes. Itís a great system. The Yardstore also sells some of these pieces. In addition there are drill bits with the quick change available. It may take a little work to put this system together now but itís a great system.
__________________
Ray Tonks
2022 Donation Paid
Titan IOX-370, Dual PMAGs, 9.6:1 Pistons, FM-150
Sensenich Composite 3 Blade Propeller
RV-7 Fuselage in progress
* Cabin Interior - In progress
RV-7 SB Wings
* Both Wings fully skinned
* Fuel Tanks Complete - No leaks finally
* Ailerons Complete
* Flaps Complete
RV-7 Empennage - Complete (a little fiberglass work left)
Vans Training Kit # 2 - Complete
RV-7 Preview Plans
Vans Training Kit #1 - Complete
EAA Sheet Metal Class - Complete
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:51 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.