View Single Post
Old 05-15-2022, 10:53 AM
rondawes's Avatar
rondawes rondawes is offline
Join Date: Mar 2016
Location: Wylie, TX
Posts: 110
Default Tail support for my -7A

I'm going to be adding the Super Tracks and to do that I need to move my ELT antenna back about 10" and to do that I need to get in the tail cone and to do that I need a tail stand to keep the tail from crashing to the ground.

So I priced some on AS and they were way more than I wanted to pay. After poking about on the interwebs, I came up with this:

A $35 Harbor Freight grinder stand, some eyebolts, and 3/8" pipe & fittings from Home Depot aviation supply. I didn't even have to drill the grinder stand, just used the existing holes. It would have been a bit simpler if HD had a 8" long nipple but they didn't so I put the coupling on one end and just screw the 6" nipple into that when I hook it to the plane.
Attached Thumbnails
Click image for larger version

Name:	IMG_1003.JPG
Views:	80
Size:	1.23 MB
ID:	25832  Click image for larger version

Name:	IMG_1004.JPG
Views:	87
Size:	696.1 KB
ID:	25833  Click image for larger version

Name:	IMG_1006.JPG
Views:	94
Size:	542.4 KB
ID:	25834  
Based KTKI
Donation paid July 2022
Reply With Quote