VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   RV-4 (https://vansairforce.net/community/forumdisplay.php?f=9)
-   -   spacer details for elevator pushrod (https://vansairforce.net/community/showthread.php?t=198133)

slngsht 08-11-2021 08:11 AM

spacer details for elevator pushrod
 
Hi,
I'm looking at drawings 28 and 30, and see no details for fasteners that hold the big elevator pushrod.

drawing 30 shows AN3-10A bolt and a nut. but no mention of washers or spacers at all.

Does anyone have details on that?

rv4ross 08-11-2021 08:43 AM

My drawing 30 says to see Note 1 for that connection. Note 1 says to use washers as required or make spacers out of AT6-058X5/16 to center the rod end.

slngsht 08-12-2021 08:45 AM

Makes sense. Thank you.


All times are GMT -6. The time now is 09:11 PM.