Trying to find out more about our fuel caps installed on our 1991 RV6. We are not the original builders, are trying to determine who (vendor) made our caps. There are no teflon washers on either of our cap's castings. The 1st Attachment shows one of our caps partially disassembled with the o-ring removed. Anyone familiar with our caps - who the vendor is, if there are supposed to be teflon washers on the cap castings?
The latest cap information from Usher/Van's shows that both castings have tapered seats with teflon washers, see 2nd Attachment. Our top casting has a tapered seat while the bottom casting has a flat seat. I've contacted both Van's and Usher PM - neither had information that shed light on what we have.
Thanks in advance for the help!
The latest cap information from Usher/Van's shows that both castings have tapered seats with teflon washers, see 2nd Attachment. Our top casting has a tapered seat while the bottom casting has a flat seat. I've contacted both Van's and Usher PM - neither had information that shed light on what we have.
Thanks in advance for the help!