Hello, All! I had my TRF1 F1-Rocket in for prop overhaul and while it was in the shop we noticed the tailwheel shaft was rocking a small amount from side to side. After inspection, we dropped the bolt that holds the shaft in place and it was bent in two places. (a little bend at the top and a little bend at the bottom.) Also, a crack in the receiver sleeve for the shaft was found. My question is: What is the best way to repair the frame/receiver that the tailwheel shaft slides into?
Too Many Landings on Grass Strips!!!
Dain
Too Many Landings on Grass Strips!!!
Dain