Maintenance sheet from Performance Propellers specifies 30-35 FL-LBS for 3/8" bolts.
Sensenich specifies 15 to 19 fl-lbs for 3/8" AN6 bolts.
Anyone know why the difference?
I found this:
"...Both are very tough (60 layers of maple vs wood/composite) with bolt torques around 35 ft pounds...."
Is it simply because the Performance Propellers are made of harder wood?
Finn
Sensenich specifies 15 to 19 fl-lbs for 3/8" AN6 bolts.
Anyone know why the difference?
I found this:
"...Both are very tough (60 layers of maple vs wood/composite) with bolt torques around 35 ft pounds...."
Is it simply because the Performance Propellers are made of harder wood?
Finn