FlyingDiver
Well Known Member
Other than just buying a new part? Which is $515 plus shipping, and probably back-ordered for months.
I mis-read the instructions when trimming the edges that mate with the top cowl (on the sides) and trimmed 1/8" to the wrong side of the line, so I'm off 1/4" total each side.
I'm afraid if I just lay up some fiberglass from the inside, I can get it flush on the outside but it'll be way thicker on the inside than it should be, which will make it really hard to line up the hinges with the top cowl.
I mis-read the instructions when trimming the edges that mate with the top cowl (on the sides) and trimmed 1/8" to the wrong side of the line, so I'm off 1/4" total each side.
I'm afraid if I just lay up some fiberglass from the inside, I can get it flush on the outside but it'll be way thicker on the inside than it should be, which will make it really hard to line up the hinges with the top cowl.