[hiddenhearth]

This weekends RV6 project is to rebuild all 4 master cylinders (2 Matco on right side and 2 Clevland on left side) and install ACS 600 brake reservoirs then bleed the system. Any suggestions or pictures of the reservoir installation would be greatly appreciated. Not sure how two reservoirs will feed four master cylinders? I am sure I will figure it out if I don't go bald first!

 

[PJSeipel]

Any suggestions or pictures of the reservoir installation would be greatly appreciated.

Try http://www.romeolima.com/RV8/IdeasProducts.htm#PRODUCT: Aircraft Spruce A-600 Brake Reservoirs

Not sure how two reservoirs will feed four master cylinders?

You should have tubing from the current firewall resevoir to one set of master cylinders. You should just have to disconnect it and replace it with the A-600 resevoirs.

PJ