[RV7ator]

Anyone have a line on sourcing a barbed 1/8 (ID) tube to 1/8 male pipe thread fitting? Also, 1/8 tube barbed tee fittings.

It's for transitioning from the 1/8 tube nipple on P-Mags to 1/8 plumbing, with some tube wyes.

No joy on ACS or Wicks.

John Siebold

 

[mburch]

I've used this website for various projects in the past, both aviation and non:

http://fittingsandadapters.com/malpiptap.html

 

[PaulvS]

Tee

This tee may be suitable?
https://www.aircraftspruce.com/catalog/appages/fuelinesplit2.php

Not sure where to get the other fitting though, the smallest barb I've seen is 3/16 with 1/8 NPT thread.

 

[VA Maule]

Go goggling

Here’s some . You can probably also easily find 1/4” barb x 1/8” pipe at any auto parts store and use silicone or urethane to seal the tube into the 1/4” barb

 

[krhea]

1/8" barb x 1/8" Npt barb fitting

Johnstone Supply, local HVACR supply house.

L38-247 part number.

Keith Rhea
RV7

 

[TS Flightlines]

we do it alittle differently--

Tom