VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-4
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-11-2021, 08:11 AM
slngsht slngsht is offline
 
Join Date: May 2016
Location: Purcellville, VA
Posts: 286
Default spacer details for elevator pushrod

Hi,
I'm looking at drawings 28 and 30, and see no details for fasteners that hold the big elevator pushrod.

drawing 30 shows AN3-10A bolt and a nut. but no mention of washers or spacers at all.

Does anyone have details on that?
Reply With Quote
  #2  
Old 08-11-2021, 08:43 AM
rv4ross rv4ross is offline
 
Join Date: Dec 2005
Location: Locust Grove, GA
Posts: 58
Default

My drawing 30 says to see Note 1 for that connection. Note 1 says to use washers as required or make spacers out of AT6-058X5/16 to center the rod end.
Reply With Quote
  #3  
Old 08-12-2021, 08:45 AM
slngsht slngsht is offline
 
Join Date: May 2016
Location: Purcellville, VA
Posts: 286
Default

Makes sense. Thank you.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:34 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.