VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 06-03-2021, 12:37 PM
edhunter edhunter is offline
 
Join Date: Jul 2020
Location: Fredericksburg
Posts: 10
Default Roll servo bolts

Apologies if this has been answered before, but a search did not show what I was looking for... I need to replace a roll servo, going from Garmin to Dynon. I found this pic today in the forsale section, which made me think of it...
Question: The two bolts holding the mounting bracket in the wing, do these have nuts on the backside, or do they bolt into nut plates? Did not want to loosen as did not see an easy way to get to the other side if are held with nuts, although logic would dictate a nut plate of sorts... Did not build...
Thanks, ed
Attached Images
 
Reply With Quote
  #2  
Old 06-03-2021, 12:41 PM
bjdecker's Avatar
bjdecker bjdecker is offline
 
Join Date: Jun 2005
Location: Georgetown, TX
Posts: 882
Default

There are nut plates. See attached.
Attached Thumbnails
Click image for larger version

Name:	Screen Shot 2021-06-03 at 1.40.19 PM.png
Views:	132
Size:	306.7 KB
ID:	12192  
__________________
Brian Decker
RV-7 (Flying)
Reply With Quote
  #3  
Old 06-03-2021, 01:47 PM
PhatRV PhatRV is online now
 
Join Date: Mar 2018
Location: Buena Park, California
Posts: 564
Default

The screw holes match up to the nutplate on the wing web. This is on my right wing. The servo control arm is connected to the aileron control horn.
Attached Thumbnails
Click image for larger version

Name:	20210603_124131.jpg
Views:	105
Size:	144.3 KB
ID:	12200  
__________________
RV8 standard build: Empennage 99% completed
Wing -- Closed
Fuselage -- Canopy Done. Fiberglass 80%
Avionics Installation -- 90%
Firewall Forward -- Cowl completed. Baffle 90%
Electrical -- 90%

Donation paid through 2021
Reply With Quote
  #4  
Old 06-03-2021, 04:17 PM
edhunter edhunter is offline
 
Join Date: Jul 2020
Location: Fredericksburg
Posts: 10
Default

Thanks all...
Reply With Quote
  #5  
Old 06-04-2021, 09:44 AM
g zero g zero is offline
 
Join Date: Jun 2007
Location: palm coast fl.
Posts: 990
Default Roll servo

Curious why the swap out ? Iíve flown both .
__________________
Rv8
N 666 TA
First Flight 2-3-2015 🚀
Reply With Quote
  #6  
Old 06-04-2021, 12:11 PM
edhunter edhunter is offline
 
Join Date: Jul 2020
Location: Fredericksburg
Posts: 10
Default

Quote:
Originally Posted by g zero View Post
Curious why the swap out ? Iíve flown both .
Bought a partial built kit with a friend of mine. Wings came with the garmin servo installed. Got a good deal on a full advanced setup, including the dynon servos. Hence the swap.
Reply With Quote
  #7  
Old 06-04-2021, 03:34 PM
Vfr1200's Avatar
Vfr1200 Vfr1200 is offline
 
Join Date: Apr 2020
Location: Celina ohio
Posts: 33
Default Dynon

Quote:
Originally Posted by edhunter View Post
Bought a partial built kit with a friend of mine. Wings came with the garmin servo installed. Got a good deal on a full advanced setup, including the dynon servos. Hence the swap.
Nice , Iím always looking for a good deal , waiting till last minute to get the panel ordered Iím probably a year away with the slow build
Reply With Quote
  #8  
Old 06-04-2021, 04:17 PM
g zero g zero is offline
 
Join Date: Jun 2007
Location: palm coast fl.
Posts: 990
Default Servo

Iím interested in the Garmin Servo if you want to sell it .
__________________
Rv8
N 666 TA
First Flight 2-3-2015 🚀
Reply With Quote
  #9  
Old 06-06-2021, 10:24 AM
edhunter edhunter is offline
 
Join Date: Jul 2020
Location: Fredericksburg
Posts: 10
Default

Quote:
Originally Posted by g zero View Post
Iím interested in the Garmin Servo if you want to sell it .
It got traded in the deal.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:50 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.