I acquired my rocket project with the flaps already built and fitted. Their “stops” are set up opposite of the plans:
There is no overlap of flap / fuselage on the bottom.
Rather, there are angles on the fuselage that the tops of the flaps contact when the bottoms are even with the fuselage.
Edit: since I acquired the project with wings removed for transport, I’m curious to learn if there was a specific cosmetic reason that the flap stops were installed on the fuselage by the original builder.
I hope I don’t find something odd or I’ll fitting…
"The plane won't build itself..." RV-7A N7.62MM sold
-RV4 purchased. Extensive refurbishment complete. ďTakes off by itís self, flys hands off, lands by itís self...Ē
-HRII project: paint and panel to go!
Last edited by andoman : 11-23-2021 at 08:52 AM.