What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

I will show you mine if you show me yours.

scottw

Member
What are builders doing at this interference point? fwd top skin is binding against backing flange.
canopy2.jpg
 
Get out the cutter

Scott,
I cut a slice out of the frame where the contact occurs. You can put MWH tape there but the slice worked fine on mine. On numerous RV4 pre-buys I have seen both approaches, more cuts than anything else.

Smokey
 
chaffing

we can call that a normal problem on the -4. mine does it too.
:rolleyes:

antichaffing tape slow the deterioration

cheer

Michel
C-GVFR
 
Trim off the bulkhead and forget about it. Unless you like screeching noises when you close the canopy.

Trim it carefully along the pre-scratched guidelines and you won't even have a noticeable gap or air leak.
 
Back
Top